After upgrading to PickMaster 2.30 the camera channels seems to have changed. I am using multiple frame grabbers.
When installing frame grabber drivers for multiple camera boards, the order of installation depends on in what order Windows detects the frame grabbers. This order can be somewhat random. If the frame grabbers are detected in the wrong order, time after time, install one frame grabber at a time.
Remove all frame grabber drivers from the windows device manager (right click “My computer”, choose “Proporties” and then open the device manager from the hardware tab). Shutdown the computer and remove all frame grabbers except the frame grabber that should be detected first. Start the computer again, install the drivers necessary and then shut down the computer again. Repeat this procedure until all frame grabbers are installed in the correct order.